This self-priming, external spur gear pump has 1-inch ports and will deliver flows up to 22 gpm. The G8 Series (standard) is designed for 50 psig differential pressure. Designed for simplified maintenance, the pump may be quickly disassembled without the need to break piping connections. The G8 was designed for continuous duty use and can handle a wide variety of applications ranging from viscous to very thin clear, non-abrasive fluids.

Pump housings are investment cast in a variety of corrosion resistant metallurgies, with adequate wall thicknesses for hydro testing. Housings are finish machined on precision CNC equipment.

Metallic and non-metallic gears are machine generated. A variety of materials are available, and an existing pump can be quickly converted to satisfy different service conditions. Combination metallic and non-metallic gear sets allow the pump to handle low viscosity and non-lubricating fluids at standard motor speeds. This capability provides reduced noise levels and eliminates the need for larger pumps operating at reduced speeds. All gear materials are non-sparking for use with hazardous fluids.

Pumps do not require periodic lubrication, since the pumped fluid provides the necessary lubrication and cooling. In addition to reducing maintenance, this feature eliminates the possibility of contamination of the pumped fluid.

Mechanical seals are available for the most demanding applications. Single internal and double seals provide operation to 200 psi. Single external seals provide limited service to 50 psi. Two stuffing box designs are also offered.

Features